1、锥足圆鼎
1. Cone foot tripod
此鼎斜折沿、厚方唇、拱形立耳微外移，下部微鼓，圆底。口唇饰燕尾纹一周，双耳外侧饰龙纹。初始系浑铸成形，后因鼎足出现浇不足缺陷而再次浇注，致使空足与腹腔不连通。3块腹范与1块腹芯组成铸型。
The tripod inclined fold along, thick square lip, arch ear slightly outside, lower drum, round bottom. The lips are decorated with swallow-tail pattern for a week, and the outer ears are decorated with dragon pattern. Initial system was formed by turbid casting, and then poured again because of insufficient pouring of tripod foot, resulting in disconnection between empty foot and abdominal cavity. Three abdominal fans and one abdominal core make up the casting mould.
3块腹范沿三足外侧中线分型。足部、足腹连接处及腹部纹饰上的铸造披缝明显。腹芯与三足芯、芯合为一体；沿二足倒立浇沣成形。腹部及口沿外的纹饰为模作纹，足似范作纹。鼎腹可见一形状不规则的。
Three abdominal fans were grouped along the lateral midline of the tripod. The casting seams on the foot, the joint of foot and abdomen and the abdomen decoration are obvious. The abdominal core is integrated with the tripod core and core, and is formed by upside-down casting along the two feet. The decorations on the abdomen and the edge of the mouth are modelled patterns, which resemble the model pattern. An irregular shape can be seen in the tripod belly.